Headsets

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: ZS44/28.6/H8/K|ZS56/40/H4/K • Top Type: ZS - ZeroStack • Top Head Tube Inside Dia.: 44.00mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 8mm • Top Bearing Type: Black Oxide, Sealed • Bottom Type: ZS - ZeroStack • Bottom Head Tube Inside Dia.: 55.95mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 4mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 109g

The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into head tube with very little stack height. Zero stack cups press into the head tube with very little stack height. - Sealed black oxide bearings - Steel crown race with integrated seals

The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Integrated bearings fit directly into compatible head tubes without the need of a bearing press. - Sealed black oxide bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - Steel crown race with integrated seals - Interlok spacer compatible - Uses 36/45 degree crown race and compression ring - Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

The GeoShift Performance Angle Headset allows you to adjust the geometry of your bike by changing the head tube angle, available in 1 or 2 degree options. This unique design lets the bearings sit at an angle to align with the steerer tube, preventing creaking noises commonly found with angle headsets that feature a spherical design. Reduce the head tube angle to make for slacker geometry and added stability on fast descents, or increase the angle using the opposite orientation of the headset, to make for steeper geometry and quicker steering with maximum front wheel traction. - Enduro black oxide coated chromium steel bearing included on both the upper and lower - Upper headsets ship with a star nut which can only be used on forks with steel or aluminum steerer tubes. For forks with carbon steerer tubes you will need a compression plug (sold separately) - Machined in the USA with lightweight, strong, durable aircraft-grade 6061 aluminum - Includes: Upper and lower cups, bearings, crown race, star nut, shims, stem cap with 5mm integrated spacer and bolt - 2 Degree Adjustment - Short version is designed for headtube lengths between 90 - 115 mm

Wolf Tooth headsets are machined here in our Minnesota shop with aircraft-grade 6061 aluminum. They are designed to be lightweight, strong, and durable. Our headsets have three levels of industry-leading custom sealing to protect bearings from the elements and prolong the life of the headset. Available in a variety of colors. These IS headsets are for frames with molded-in internal bearing cups. Premium Headsets with Enduro stainless steel bearings have a lifetime warranty. Upper assembly features: - Ultralight Stem Cap with Integrated Spacer plus an aluminum bolt and a star nut. - 7, 15, and 25mm stack height top cover options (7mm cover = 8mm total stack, 15mm cover = 15mm total stack, 25mm cover = - 25mm total stack. - O-ring seal prevents water intrusion around the steerer tube. - Custom-molded upper lip seal provides additional protection for the upper bearing. - bearing top cap outer diameter 45.8 mm

Grade 300 retainer bearings for headset and bottom bracket service - 5/32" ball diameter - 16 balls per retainer - Grade 300 Bearings - 10 Retainers/Bag

Grade 300 retainer bearings for headset and bottom bracket service - 5/32" ball diameter - 20 balls per retainer - Grade 300 Bearings - 10 Retainers/Bag

Grade 300 retainer bearings for headset and bottom bracket service - 5/32" ball diameter - 22 balls per retainer - Grade 300 Bearings - 10 Retainers/Bag

Loose ball headset bearing retainers. - Grade 300 bearings

Upgrade your standard 1 1/8" headtube frame to an integrated style headset with the Mission Conversion Headset! Uses stronger Campy type sealed bearings and includes dust cover cap, spacer, and steel fork bearing race. Product Specifications - Headset Type: Standard 1 1/8" - Bearing Type: 41.8mm x 45 Degree - Includes: Headset, Spacer, Star Nut, Fork Cap - Weight: 5.3oz

Top and bottom cups are available separately allowing our headsets to fit almost any frame and fork combination. KEY FEATURES - Replaceable stainless steel bearings (resist corrosion) - Split crown race for easy installation and removal - Wide selection of different cup sizes to fit most headset combinations - Multiple seals to keep out the elements - Available in black, silver, bronze, blue, red, purple and orange - Top and bottom cups are available separately allowing our headsets to fit almost any frame and fork combination - Head Doctor top cap sold seperately - Headset cups use custom made, replaceable stainless steel bearings to resist corrosion - The cups are all machined from 2014 T6 aluminium - Sealing is achieved through an adjustable taper ring cover and integrated rubber seal

Top and bottom cups are available separately allowing our headsets to fit almost any frame and fork combination. KEY FEATURES - Replaceable stainless steel bearings (resist corrosion) - Split crown race for easy installation and removal - Wide selection of different cup sizes to fit most headset combinations - Multiple seals to keep out the elements - Available in black, silver, bronze, blue, red, purple and orange - Top and bottom cups are available separately allowing our headsets to fit almost any frame and fork combination - Head Doctor top cap sold seperately - Headset cups use custom made, replaceable stainless steel bearings to resist corrosion - The cups are all machined from 2014 T6 aluminium - Sealing is achieved through an adjustable taper ring cover and integrated rubber seal

Top and bottom cups are available separately allowing our headsets to fit almost any frame and fork combination. KEY FEATURES - Replaceable stainless steel bearings (resist corrosion) - Split crown race for easy installation and removal - Wide selection of different cup sizes to fit most headset combinations - Multiple seals to keep out the elements - Available in black, silver, bronze, blue, red, purple and orange - Top and bottom cups are available separately allowing our headsets to fit almost any frame and fork combination - Head Doctor top cap sold seperately - Headset cups use custom made, replaceable stainless steel bearings to resist corrosion - The cups are all machined from 2014 T6 aluminium - Sealing is achieved through an adjustable taper ring cover and integrated rubber seal

Top and bottom cups are available separately allowing our headsets to fit almost any frame and fork combination. KEY FEATURES - Replaceable stainless steel bearings (resist corrosion) - Split crown race for easy installation and removal - Wide selection of different cup sizes to fit most headset combinations - Multiple seals to keep out the elements - Available in black, silver, bronze, blue, red, purple and orange - Top and bottom cups are available separately allowing our headsets to fit almost any frame and fork combination - Head Doctor top cap sold seperately - Headset cups use custom made, replaceable stainless steel bearings to resist corrosion - The cups are all machined from 2014 T6 aluminium - Sealing is achieved through an adjustable taper ring cover and integrated rubber seal

Top and bottom cups are available separately allowing our headsets to fit almost any frame and fork combination. KEY FEATURES - Replaceable stainless steel bearings (resist corrosion) - Split crown race for easy installation and removal - Wide selection of different cup sizes to fit most headset combinations - Multiple seals to keep out the elements - Available in black, silver, bronze, blue, red, purple and orange - Top and bottom cups are available separately allowing our headsets to fit almost any frame and fork combination - Head Doctor top cap sold seperately - Headset cups use custom made, replaceable stainless steel bearings to resist corrosion - The cups are all machined from 2014 T6 aluminium - Sealing is achieved through an adjustable taper ring cover and integrated rubber seal

Top and bottom cups are available separately allowing our headsets to fit almost any frame and fork combination. KEY FEATURES - Replaceable stainless steel bearings (resist corrosion) - Split crown race for easy installation and removal - Wide selection of different cup sizes to fit most headset combinations - Multiple seals to keep out the elements - Available in black, silver, bronze, blue, red, purple and orange - Top and bottom cups are available separately allowing our headsets to fit almost any frame and fork combination - Head Doctor top cap sold seperately - Headset cups use custom made, replaceable stainless steel bearings to resist corrosion - The cups are all machined from 2014 T6 aluminium - Sealing is achieved through an adjustable taper ring cover and integrated rubber seal

Top and bottom cups are available separately allowing our headsets to fit almost any frame and fork combination. KEY FEATURES - Replaceable stainless steel bearings (resist corrosion) - Split crown race for easy installation and removal - Wide selection of different cup sizes to fit most headset combinations - Multiple seals to keep out the elements - Available in black, silver, bronze, blue, red, purple and orange - Top and bottom cups are available separately allowing our headsets to fit almost any frame and fork combination - Head Doctor top cap sold seperately - Headset cups use custom made, replaceable stainless steel bearings to resist corrosion - The cups are all machined from 2014 T6 aluminium - Sealing is achieved through an adjustable taper ring cover and integrated rubber seal

Top and bottom cups are available separately allowing our headsets to fit almost any frame and fork combination. KEY FEATURES - Replaceable stainless steel bearings (resist corrosion) - Split crown race for easy installation and removal - Wide selection of different cup sizes to fit most headset combinations - Multiple seals to keep out the elements - Available in black, silver, bronze, blue, red, purple and orange - Top and bottom cups are available separately allowing our headsets to fit almost any frame and fork combination - Head Doctor top cap sold seperately - Headset cups use custom made, replaceable stainless steel bearings to resist corrosion - The cups are all machined from 2014 T6 aluminium - Sealing is achieved through an adjustable taper ring cover and integrated rubber seal

Reliable and durable. Our conventional headset is designed to fit the standard 1 1/8" fork steerer. The headset uses custom made, replaceable stainless steel bearings to resist corrosion. KEY FEATURES - Replaceable stainless steel bearings (resist corrosion) - Split crown race for easy installation and removal - Wide selection of different cup sizes to fit most headset combinations - Multiple seals to keep out the elements - Available in black, silver, bronze, blue, red, purple and orange - Top and bottom cups are available separately allowing our headsets to fit almost any frame and fork combination - Head Doctor top cap sold seperately - Headset cups use custom made, replaceable stainless steel bearings to resist corrosion - The cups are all machined from 2014 T6 aluminium - Sealing is achieved through an adjustable taper ring cover and integrated rubber seal

Top and bottom cups are available separately allowing our headsets to fit almost any frame and fork combination. KEY FEATURES - Replaceable stainless steel bearings (resist corrosion) - Split crown race for easy installation and removal - Wide selection of different cup sizes to fit most headset combinations - Multiple seals to keep out the elements - Available in black, silver, bronze, blue, red, purple and orange - Top and bottom cups are available separately allowing our headsets to fit almost any frame and fork combination - Head Doctor top cap sold seperately - Headset cups use custom made, replaceable stainless steel bearings to resist corrosion - The cups are all machined from 2014 T6 aluminium - Sealing is achieved through an adjustable taper ring cover and integrated rubber seal

Top and bottom cups are available separately allowing our headsets to fit almost any frame and fork combination. KEY FEATURES - Replaceable stainless steel bearings (resist corrosion) - Split crown race for easy installation and removal - Wide selection of different cup sizes to fit most headset combinations - Multiple seals to keep out the elements - Available in black, silver, bronze, blue, red, purple and orange - Top and bottom cups are available separately allowing our headsets to fit almost any frame and fork combination - Head Doctor top cap sold seperately - Headset cups use custom made, replaceable stainless steel bearings to resist corrosion - The cups are all machined from 2014 T6 aluminium - Sealing is achieved through an adjustable taper ring cover and integrated rubber seal

Top and bottom cups are available separately allowing our headsets to fit almost any frame and fork combination. KEY FEATURES - Replaceable stainless steel bearings (resist corrosion) - Split crown race for easy installation and removal - Wide selection of different cup sizes to fit most headset combinations - Multiple seals to keep out the elements - Available in black, silver, bronze, blue, red, purple and orange - Top and bottom cups are available separately allowing our headsets to fit almost any frame and fork combination - Head Doctor top cap sold seperately - Headset cups use custom made, replaceable stainless steel bearings to resist corrosion - The cups are all machined from 2014 T6 aluminium - Sealing is achieved through an adjustable taper ring cover and integrated rubber seal

Top and bottom cups are available separately allowing our headsets to fit almost any frame and fork combination. KEY FEATURES - Replaceable stainless steel bearings (resist corrosion) - Split crown race for easy installation and removal - Wide selection of different cup sizes to fit most headset combinations - Multiple seals to keep out the elements - Available in black, silver, bronze, blue, red, purple and orange - Top and bottom cups are available separately allowing our headsets to fit almost any frame and fork combination - Head Doctor top cap sold seperately - Headset cups use custom made, replaceable stainless steel bearings to resist corrosion - The cups are all machined from 2014 T6 aluminium - Sealing is achieved through an adjustable taper ring cover and integrated rubber seal

Top and bottom cups are available separately allowing our headsets to fit almost any frame and fork combination. KEY FEATURES - Replaceable stainless steel bearings (resist corrosion) - Split crown race for easy installation and removal - Wide selection of different cup sizes to fit most headset combinations - Multiple seals to keep out the elements - Available in black, silver, bronze, blue, red, purple and orange - Top and bottom cups are available separately allowing our headsets to fit almost any frame and fork combination - Head Doctor top cap sold seperately - Headset cups use custom made, replaceable stainless steel bearings to resist corrosion - The cups are all machined from 2014 T6 aluminium - Sealing is achieved through an adjustable taper ring cover and integrated rubber seal

Top and bottom cups are available separately allowing our headsets to fit almost any frame and fork combination. KEY FEATURES - Replaceable stainless steel bearings (resist corrosion) - Split crown race for easy installation and removal - Wide selection of different cup sizes to fit most headset combinations - Multiple seals to keep out the elements - Available in black, silver, bronze, blue, red, purple and orange - Top and bottom cups are available separately allowing our headsets to fit almost any frame and fork combination - Head Doctor top cap sold seperately - Headset cups use custom made, replaceable stainless steel bearings to resist corrosion - The cups are all machined from 2014 T6 aluminium - Sealing is achieved through an adjustable taper ring cover and integrated rubber seal

CNC machined Space Doctors are designed to compliment our range of headsets and stems. KEY FEATURES - Laser etched, anodised 2014 T6 aluminium - 2mm, 5mm, 10mm and 20mm spacers in pack - Available in black, silver, bronze, red, blue, purple and orange - Designed to fit 1 1/8" diameter steerers

Replacement headset bearings from FSA. - Compatible with most Trek MTB integrated headset systems - Sealed bearing for long life - Compatible with Knock Block Headsets

FSA Standard Headset Bearings

FSA Standard Headset Bearings