Filter By:
- Bar Ends (6)
- BMX (5)
- Bottom Brackets (159)
- Brakes/Levers/Pads (457)
- Cables (134)
- Cassettes/Freewheels (112)
- Chainrings (215)
- Chains (98)
- Show More Categories
- Cranksets (227)
- Derailleurs (172)
- Forks (62)
- Groups (25)
- Handlebar Grips/Tape (186)
- Handlebars (74)
- Headsets (84)
- Pedals (215)
- Saddles (165)
- Seatposts (50)
- Shift/Brake Combinations (69)
- Shifters (119)
- Shocks (37)
- Stems (62)
- Other (742)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts

$0.10 - $39.99
Jagwire's Brake or Shift Cable Tips are made of lightweight, corrosion-resistant and durable aluminum and are the right size to nicely fit over the ends of up to 1.8mm-diameter cables. These caps are crimped in place on the cables to prevent fraying and ensure your cables last a long time. The tips come in colors to add a little style to your bike.

$0.10 - $39.99
Jagwire's Shift Cable Tips are made of lightweight, corrosion-resistant and durable aluminum and are the right size to nicely fit over the ends of shift cables. These caps are crimped in place on the cables to prevent fraying and ensure your cables last a long time. The tips come in Gold and Silver so they also add a little style to your bike.
- Each Bottle contains 500 tips

$0.20 - $28.99
Loose ball bearings to fit many brands of hubs, headsets, and bottom brackets. Grade 25 bearings are Dura-Ace or Campagnolo Record quality.

$0.20 - $22.99
Loose ball bearings to fit many brands of hubs, headsets, and bottom brackets. Grade 300 — Ultegra level quality.

$0.25 - $0.99
Jagwire's Open End Caps are quality metal ferrules that put the finishing touch on your brake cable housing sections. They reinforce them so they stay straight and allow the cables and brakes to operate as smoothly as possible.

$0.32 - $59.99
Jagwire's Open End Caps for Shift Housing are quality ferrules that put the finishing touch on your shift cable housing sections. They reinforce them so they stay straight and allow the cables and derailleurs to operate as smoothly as possible.

$1.00
Jagwire's V-Brake Boot covers and seals the points where the the cable on your V-Brakes, linear-pull and direct-pull brakes enter the noodle. It's made of flexible rubber to seal the cable and help keep dirt, grit and moisture from entering. It keeps your cables and brakes working nice and smooth and ensures your cables last as long as possible. You get a bag of 10.

$1.49 - $11.99
Jagwire's M7 Adjusting Barrel is a 7 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right part for many older-style mountain bike brake levers. It comes in two models and is made of durable metal with a lockring for locking your adjustments. You get a pack of 10.

$2.00
Linear pull brake noodles come in a variety of configurations designed to be compatible with any housing approach angle.

$2.00
Magura olives (compression ferrule) bag/20
- Small parts used to install hydraulic hose for Magura disc brakes.
- Compatible with Campagnolo H11 brake/shift levers

$2.15 - $16.99
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.

$2.39
Jagwire's M10 Adjusting Barrel is a 10 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right replacement part for most mountain bike brake levers. It's made of durable metal with a lockring for locking your adjustments. You get a pack of 10.

$2.99
Jagwire's 5mm Anchor Bolt fits certain models and types of brakes and is used to secure the cable in place after adjusting it. It is made of plated metal for strength and durability. You get a pack of 25.

$2.99
This simple repair part is vital for getting bikes with side-pull caliper brakes safely back on the road.
- 6mm size

$2.99
Jagwire's M6 Adjusting Bolt is a metal adjusting barrel that is the correct replacement adjusting barrel for the cable clips/hangers found on many cable brake systems old and new. It makes it easy to tighten/loosen your brakes without tools. Its 6 x 1.0mm threading fits most clips/hangers and it has a lockring for locking your brake adjustment once it's set. You get a pack of 25.

$3.39 - $31.99
Jagwire's Brake Noodles feature stainless-steel tubes with aluminum ends for durability and excellent performance. You get 10 of them for all your bicycle setup needs.

$3.99
Basics brake cables provide value on a budget.
- Pre-stretched
- Double ended for compatibility with SRAM/Shimano road and mountain brakes
- Color: Silver
- Diameter: 1.6mm

$3.99 - $4.99
Jagwire's Sport Slick Galvanized Shift Cable is a fine shift cable made of galvanized steel for optimum shifting performance and durability.

$4.89 - $11.99
Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.

$4.99
Basics brake cables provide value on a budget.
- Double ended for compatibility with SRAM/Shimano road and mountain brakes
- Pre-stretched
- Cable Head: Shimano/SRAM Road, Shimano/SRAM Mountain
- Color: Silver
- Diameter: 1.6mm
- Length: 2795mm

$4.99
Compatible with cantilever brakes, Jagwire's Mountain Sport Brake Pads boast Jagwire's tried-and-true all-weather compound for excellent speed control, stopping power and durability.
Page 1 of 115
Next page