Filter By:
Accessories/Parts

$5.99
Replacement Wheelstrap for Holdup. Adds 2.5" of Length to Forklift and Frontloader Rear wheel mounts.

$10.99
The control key is "uncut" and is used only for the removal and installation of an unlocked SKS core.
Product Specs:
- Weight: 0.02 lbs.
- Limited Lifetime Warranty

$13.99
Rubber straps used to secure bikes to Yakima hitch and strap racks manufactured prior to 2004. Each strap has 5 holes which are 3/4" in diameter. Since 2004 we have used rubber straps called Chain Straps, which each have 8 holes that are 1/2" in diameter.

$18.99
Kuat Racks Phat Bike Kit. This item includes the strap extender for the rear tire strap and a secondary Velcro strap for the front tire.

$19.00
1.25" to 2" Adapter for our Sherpa 2.0, NV 2.0, NV Base 2.0, Sherpa, Alpha, and Beta racks.
- Not for use on our original NV rack.

$19.99
End caps for 86" Cross Bars. Includes four end caps
Please note these end caps are specific to the 86" cross bar.

$22.99
Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.

$26.99
SKS stands for "Same Key System." These types of cores enable you to lock all your Yakima products with just one key. When replacing a core on your Yakima product, you may need a Control key to remove your existing unlocked core so you can transfer the core to a different Yakima product.

$38.99
Make just about any accessory lockable with an SKS accessory housing. Use with bike, boat or BasketCase accessories that don't accept SKS lock cores. SKS lock cores sold separately.
- Lock rack accessories to your vehicle's crossbar
- Use with bike, boat, and BasketCase accessories
- SKS Lock Cores sold separately
Product Specs:
- Weight: 0.20 lbs.
- Dimensions: L 4.00 in x W 3.25 in x H 1.00 in
- Limited Lifetime Warranty

$39.00
Kuat's lock comes with a burlap bag, dust cap, two keys, and a Küat keychain bottle opener. 3/8" pin is for their 1.25" racks and the 1/2" pin is for their 2" racks.

$39.95
The Thule Xadapt 7 Adapter Kit makes it possible to connect Thule carriers to Thule Professional load bars. Please contact us with any questions regarding compatibility.

$39.95
A set of extra-long replacement wheel straps to enable transport of very large-tire fat bikes.
- Fits Thule EasyFold XT bike racks

$39.99
Thule's No-Sway Cages stabilize and prevent bike-to-bike contact on your hitch-mounted rack. They're only compatible with Thule's T3 cradles. You get 2 per pack (enough for 2 bikes).

$39.99
Lock housing for Q Towers. Includes 4 lock housings. SKS lock cores not included (sold separately).

$44.99
Fat bikes fit fine with long wheel straps to accommodate fat bikes on StageTwo and StageTwo +2.
- Includes 2 FatStraps to carry two fat bikes?
- Fits tires sizes up to 20x 4.0", 26" x 5.0" and 27.5x 4.5"

$48.99
Thru-axle adapter works with WheelHouse to hold wheels with 12mm and 15mm thru-axle.
- Easy cam lever for quick installation
- Durable stainless steel skewer
- Up to 110mm front hubs
Product Specs:
- Weight: 0.44 lbs.
- Dimensions: L 9.00 in x W 0.75 in x H 2.00 in
- Limited Lifetime Warranty

$49.99
Yakima's Hood Anchor creates a secure attachment point at your hatch, trunk or hood for bow and stern tie downs. Sold in pairs, they’re highway-speed strong, coated to protect your vehicle’s paint job, and super easy to use - just drop them in place.
Product Details
- Creates a secure attachment point for bow and stern tie downs
- Fits easily under a hood, hatch or trunk
- Installation is simple - just drop them in place
- Durable coated strap protects your vehicle's paint
- Sold as a pair Technical Specs
- Weight: 0.43 lbs
- Dimensions: L 6.50in x W 2.00in x H 10.12in

$49.99
The LongArm Pad provides some extra protection when hauling gear on Yakima's LongArm truck bed extender. The pad combines durability and protection with a soft foam core and a ballistic nylon exterior that holds up over time. Hook and loop closures are designed to hug the LongArm’s crossbar tight and a center cutout allows side or centered placement. Sold as a single pad.
PRODUCT DETAILS
- Foam padding protects boats and other cargo from damage
- Durable, ballistic nylon construction
- Look and loop closures and 28” length perfectly fit around the LongArm crossbar
- Center cutout allows side or centered placement on crossbar
- Sold as a single pad
TECHNICAL SPECS
- Weight: 0.50 lbs
- Dimensions: L 28.00in x W 3.00in x H 3.00in

$49.99
Yakima's Rattler Wheel Straps are replacement wheel straps. They install to your tray easily and have a ratcheting closure for security.

$55.99
The HD Bar SL Adaptor allows you to run the HD Bar on Yakima StreamLine towers so you can take advantage of our burliest crossbar ever. Give your vehicle a heavy-duty look and the strength to back it up.
- Adapter required to use HD Bar with StreamLine Towers. Sold in a set of four.
- Works with BaseLine, TimberLine, SkyLine and RidgeLine Towers only.
- Weight: 0.42 lbs
- Dimensions: L 1.75in x W 1.50in x H 1.00in
- No Assembly Required

$55.99
With more than a quarter century of real-world testing, Yakima's iconic round bar is proven across a range of adventures and under a variety of loads. Strong, utilitarian and easy to use—this classic is a classic for a reason. Bar adapter that allows you to run RoundBar on StreamLine Towers.
- Adapter required to use RoundBars with the New StreamLine Towers. Sold in a set of four.
- Includes 4 RoundBar end caps
Product Specs:
- Weight: 0.42 lbs.
- Dimensions: L 2.00 in x W 2.00 in x H 1.00 in
- Limited Lifetime Warranty

$58.99
Our versatile new Eye Bolts integrate seamlessly with our Truck Collection HD Bars, and most T-slot crossbars, to create instant tie-down points for securing gear. Made Yakima-smart, they’re secure, strong and easy to install—just drop them into the slot and twist into place.
Product Details:
- Rugged steel construction with durable black corrosion resistant finish for many years of use
- Includes hardware for both HD Bar and standard T-slot crossbars
- Handles up to 250 lbs. on our HD Bars, and up to 165 lbs. on Yakima JetStream, FlushBar and RailBar crossbars
- Set of two
Product Specs:
- Weight: 0.50 lbs
- Dimensions: L 1.75in x W 0.75in x H 2.12in
Page 1 of 4
Next page