Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Fenders

$9.99
Topeak's MTX DeFender is the perfect addition to your RX BeamRack. It clips seamlessly to the rack and provides valuable protection against moisture and trail grime.

$9.99
Topeak's RX DeFender is the perfect addition to your RX BeamRack. It clips seamlessly to the rack and provides valuable protection against moisture and road grime.

$14.22
- Spoiler/lower fender
- 35mm fits 35 Chromoplastics, Commuter II & Raceblade fenders
- Hardware included

$14.22
X-Long Mudflap/Spoiler can be retrofitted to any fender profile of the correct size. A hole may need to be drilled in the profile if one isn't already there.
- Adds 6 inches of coverage to any fender profile
- 35mm size fits fender profiles up to 35mm
- 53mm size fits fender profiles 46mm-55mm

$15.65
Addd an extra dose of stability to SKS's Velo 42 and Velo 47 fenders. A stainless steel U-stay mounts to the fenders and your frame eyelets to eliminate rattling and bouncing fenders.

$15.99
- Technopolymer construction
- Durable and weatherproof material
- Fits most front forks
- Zip ties included

$16.99
- Compatible with 16'' and 20'' wheels
- Front: T steel plate mounting system
- Rear: Clip with built in L shape bracket
- Blade width: 55mm

$17.07
The S-Guard is not just for road bike cyclists; this super-lightweight (24g) and small mudguard protects your bottom from mud and water. Made with super-soft material, it fits on nearly every saddle with the addition of a cable tie.

$17.49
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes.
- Material: Polypropylene
- Added Features: 3M reflective printing
- Size: 31.7cm / 12.5" (in length)
- Weight: 42g / 1.48oz

$17.99
Versatile, flexible, front fender for mountain bikes. Fits virtually any fork with arch in front and any tire diameter with width up to 3.0".
- Slop Stop - The Slop Stop leading edge catches mud and water the tire picks up and flings forward. Catching this slop at the tire helps prevent it from getting blown into your face!
- Seal Shield - The Seal Shield drop section wings provide an effective barrier to trail debris and muck, helping keep your fork seals cleaner longer.
- Flop Stop - The Flop Stop rear section's carefully engineered fold provide stiffness. This stiffness prevents the fender from contacting the front wheel and getting sucked into the fork, stopping you in a hurry! The folds also contour the fender around the tire making it a better mud guard.
- Includes 4 reusable zip ties
- Weight: 27g

$18.49
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes.
- Material: Polypropylene
- Added Features: 3M reflective printing
- Size: 35cm / 13.8" (in length)
- Weight: 68g / 2.40oz

$19.99
- Can be used on 24'' or 26'' wheels
- Designed specially for use with V-brakes and bike with suspension
- Mounting kit included
- Adjustable L shape steel bracket for rear and front mudguard
- Made of shock resistant polymer
- 100% recyclable material
- Reflective safety stickers mounting

$19.99
- A universal, quick-mount rear mudguard, that fits all seatpost diameters (25 to 32mm)
- Quick and easy to install
- Tool-free
- Reflective safety stickers
- Shock-resistant polymer
- 100% recyclable material

$19.99
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes.
- Material: Polypropylene
- Added Features: 3M reflective printing
- Size: 57.5cm / 22.6" (in length)
- Weight: 75g / 2.65

$19.99
Topeak's DeFender FX front fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The FX installs easily to your fork and features quick-release attachments that allow it to be installed and removed in seconds.

$19.99
- Made of Polypropylene with dual material spoiler
- Seat post adjustable clamp - Fit seat post Ø 25 – 32 mm
- 47 to 60 mm blade width
- Reflective strip
- Weight: 125g

$21.00 - $31.00
$21.00 - $31.00
Up to 9% Off
Optimized for RockShox forks, RockShox MTB Fenders deliver exceptional protection for your fork with deep side skirts to keep the mud and debris away from the most vital parts of your fork—and your body. Take your bike's customization to the next level with color offerings made to match RockShox decal packs—or go black-on-black for that minimalist look. MTB Fenders come complete with four beefy zip ties for installation, so you can get to the trailhead sooner and shred with much less mess.
- Works on all RockShox fork models
- Comes with 4 zip ties for immediate installation
- Offered in a wide range of colors that match RockShox's fork decal packs
- Deep side skirts protect stanchions and dust seals from rocks and debris

$21.00 - $29.99
$21.00 - $29.99
Up to 4% Off
Optimized for RockShox forks, RockShox MTB Fenders deliver exceptional protection for your fork, with deep side skirts to keep the mud and debris away from the most vital parts of your fork—and your body. Take your bike's customization to the next level with nine color offerings made to match RockShox decal packs—or go black-on-black for that minimalist look. MTB Fenders come complete with four beefy zip ties for installation so you can get to the trailhead sooner and shred with much less mess.
- Works on all RockShox fork models
- Comes with 4 zip ties for immediate installation
- Offered in a wide range of colors that match RockShox's fork decal packs
- Designed specifically for RockShox forks
- Deep side skirts protect stanchions and dust seals from rocks and debris
- Precisely placed mounting holes make the fender follow the wheel's contour, minimizing contact when the fork is compressed

$21.99
- Light and discreet saddle mounted mudguard for bikes with up to 38mm tires
- Double lock mounting system: easy on, easy off & stable
- Only 55g

$21.99
- Light and discreet saddle mounted mudguard for bikes with up to 2.8'' tires
- Double lock mounting system: easy on, easy off & stable
- Only 67g

$22.49
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes.
- Material: Polypropylene
- Added Features: 3M reflective printing
- Size: 31cm / 12.2" (in length)
- Weight: 47g / 1.66oz (FS, on fork)

$23.99
- Fits tubes from Ø27 to 35mm
- Fits 20" to 24" wheels
- Mudguard section of 55mm
- Front mudguard compatible with disc brakes or V-Brake, and suspension or rigid bikes
- Expander range on front and rear for perfect fitting
- Includes long and short clamp depending on the space needed to clip it to the frame
- Adjustable L shape steel bracket for rear and front mudguard
- Mounting kit included

$24.19
This super-lightweight (45g) and discreet mudguard protects your face (and your fork seals) from mud and water. Made of super-soft material, it fits 26", 27.5", and 29" bikes and is compatible with most forks. Thanks to the included zip ties that wrap around the fork bridge and fork legs, the Flapguard sticks close to your bike even during extremely aggressive riding.
- Also compatible on rear side of frame

$24.99
Easy-to-install front fender for your fat bike.
CONSTRUCTION
• Virtually unbreakable polypropylene body
MOUNTING SYSTEM
• Adjustable rubber straps mount to down tube
•100% recyclable; ships and merchandises as a flat sheet and snaps onto the included down tube bracket
• Hardware included
• Weight: 99 grams / 3.5 ounces

$24.99
Axiom's Rearrunner Rear Fender easily installs to your seatpost with a quick-release bracket. Axiom reduced the impact of their manufacturing and shipping methods by designing the rearrunner to fold flat. It's also made of strong, 100% recyclable plastic.
A minimalist rear fender compatible with 26”, 650B and 29” wheel sizes
- Virtually unbreakable polypropylene body
- Adjustable Boa Bracket fits all seatpost/seat tube diameters
- 100% recyclable; hardware included
Page 1 of 3
Next page