Full-Suspension

The Trust Tool for Any Trail Like the reliable tool you grab for every job, the Smuggler is the go-to bike for any trail pointed up, down, and all around. With dual 29 inch wheels, 130mm rear and 140mm front travel, the Smuggler may just be the most versatile bike in our lineup. A highly progressive leverage curve and comfortable, confidence-inspiring geo make it eager to keep going mile after mile while remaining surefooted in even the most technical terrain. Sitting squarely between the Spur and Sentinel in travel, geometry, and capability, it shares qualities of both. Inspiring and rewarding to hammer on your favorite singletrack, while never holding you back when the trail gets steep, the Smuggler will make sure you enjoy it all.

ARE YOU THIS RIDER? Do your friends ask if you intend to ride the chairlift when you invite them out for a 'few' park laps? Do your top routes frequently involve pushing up and down trails that aren't on any map? Do your favorite rides begin or end with headlamps, an ice chest, and great friends? Does your bike have to do everything well to get you there and back again? If you think you might be this rider, then Occam should be your bike. - Intended Use: Trail To Light Enduro LINKAGE UPDATE Occam uses a new two-part linkage design. Fewer pieces mean fewer interfaces, greater rigidity, and a lower chance of something working loose. Additionally, we have created a space in the axel and filled it with a handy 4 key multi-tool which is held securely in place with magnets. Always have the most-used tools close at hand for quick tweaks. INTERNAL CABLE ROUTING Occam has our latest, fully internal cable routing, using silicon plugs at the frame entry and exit points and clever conduits linking the front and rear triangle so your cables are fully protected. ASYMMETRICAL DESIGN Instead of using a less-efficient "shock tunnel", the Occam offsets the shock to the left side of the frame, allowing the right-side support to be more central and more efficiently deal with the suspension forces acting on the front triangle. This solution enables us to tune the stiffness of this high-stress area without adding unnecessary weight. THE ASYMMETRIC/OFFSET DESIGN OFFERS UNIQUE ADVANTAGES BEYOND STIFFNESS AND LOW WEIGHT. Avoiding an interrupted seat tube gives more space for dropper posts plus improves access to the shock controls. Additionally, the tidy design leaves room for a water bottle with easy left-side access.

The Norco Fluid FS A2 is built to tackle whatever trail leads to becoming the rider you want to be. Named Pinkbike’s Value Bike of the Year, Vital MTB’s Bike of the Year, and Bicycling Magazine’s Best Value Trail Bike. Get everything out of the trail that you put into it. The Fluid FS A2's 130mm travel is precision engineered, pairing custom-tuned suspension components with 140mm fork travel and boutique-level fit & finish for maximum Trail performance & potential. Details: - Intuitive precision handling. - Top-tier design and features over-deliver as skills evolve. - Sophisticated suspension components for full-platform performance and tunability. - Long-travel droppers and generous standover get you through the rough stuff. - Refined design and expanded size range. - Ride Aligned™ - Perfect fit, dialed handling, and personalized setup in minutes. - No Other Way Limited Lifetime Warranty.

EVERY RIDER, EVERY TRAIL The Norco Fluid can dive into corners. And carve sweeping turns. It's as happy mixing it up in the backwoods, as it is rolling local trails. It can elevate beginner riders to intermediate. And carry intermediates to expert. It can take your weekend hobby and turn it into a lifestyle. While so many bikes are made for a specific something or somebody, what the world needs is a bike built for every rider and every trail. That's the Norco Fluid. RIDER BENEFITS THREAD THE NEEDLE - Intuitive precision handling to pick the perfect line. - Engineered using the same Norco technology and process as our top-tier Trail bikes to give you the ride of your life no matter what path you follow. POTENTIAL FULFILLED - Top-tier design and features over-deliver as skills evolve. - 6061 aluminum frame gives experienced Trail riders what they need to ride their best and helps evolving riders develop new skills and preferences without limits. CUSTOM TUNED SUSPENSION - Sophisticated suspension components for full-platform performance and tunability. - Precision-engineered 130mm rear suspension features custom-tuned dampers co-developed with the shock manufacturers provides fully customized suspension setup and performance for every rider. ROOM TO MOVE - Long-travel droppers and generous standover get you through the rough stuff. - Long-travel, size-specific 34.9mm dropper posts and low-slung top tubes create lots of room to move, letting you roll confidently through challenging terrain and push your limits. PERFORMANCE FOR ALL - Refined design and expanded size range for accessible Trail performance. - Boutique-level fit & finish is available in 5 frame sizes, delivering superior Trail performance to riders between 5'1" and 6'7" with components selected to offer peak performance and durability. RIDE ALIGNED - Perfect fit, dialed handling and personalized setup in minutes. - The Ride Aligned Design System matches each Fluid FS to the human who rides it. - Rider-first geometry and suspension kinematics combine with custom fit and suspension tuning for personalized performance from day one.

The Norco Fluid FS A3 is built to tackle whatever trail leads to becoming the rider you want to be. Named Pinkbike’s Value Bike of the Year, Vital MTB’s Bike of the Year, and most recently, Bicycling Magazine’s Best Value Trail Bike. Get everything out of the trail that you put into it. The Fluid FS A3's 130mm travel is precision engineered, pairing custom tuned suspension components with 140mm fork travel and boutique level fit & finish for maximum Trail performance & potential. Details: - Intuitive precision handling. - Top-tier design and features over-deliver as skills evolve. - Sophisticated suspension components for full-platform performance and tunability. - Long-travel droppers and generous standover get you through the rough stuff. - Refined design and expanded size range. - Ride Aligned™ - Perfect fit, dialed handling, and personalized setup in minutes. - No Other Way Limited Lifetime Warranty.

The Fluid FS 27.5” elevates small riders’ trail experience. Show them everything you love about riding. Progressive frame design for a premium, next-level Trail ride. Fluid Dynamics The Fluid FS 27.5” lets smaller riders dig a little deeper, push a little harder and try something new. As adept rolling local trails as it is finding new directions in riding, it’s built light and tough, and holds nothing back when faced with a challenge. Holistic design for uncompromised trail performance. The Fluid FS offers smaller riders with the performance they need to grow their skills before their bodies have had a chance to shift into high gear. Frame design and evolved suspension make for smooth sailing into a confident future of riding. Details - Fluid Dynamics - Holistic design for uncompromised Trail performance. - Premium Double Butted aluminum frame. - No-compromise Components - 27.5” wheels roll smooth and light.

The best deal on a nearly new Norco Optic! Only ridden 3 times as a demo bike, the tires still have the loose bits of rubber from manufacturing, and it also gets a free upgrade to a OneUp carbon bar. Don't miss this crazy deal! Whether you're ripping fast flowy singletrack, putting the power down on punchy climbs, or tearing the tires off in the corners, the Optic continues to push the boundaries of what's possible on a short travel trail bike. The new Optic with 140mm/125mm of travel condenses years of technology from our long travel bikes into a lightweight package that's as ready to tear up climbs as it is tackling challenging descents. The VPSHP suspension layout provides increased rearward axle path and an idler to manage pedal feedback, keeping Optic's playful roots, while punching above its weight when the trails get rough. Available with a 27.5" rear wheel (MX), as well as 29" in some markets. Swapping the linkarm and lower shock mount with the "Missing Link Kit" converts between 27.5" and 29" to let you pick the wheelsize that suits you best, while maintaining geometry and kinematics to ensure consistent fit and bike setup. - Aluminum hydroformed frame with Enduro bearings, 125mm travel. - Ride Aligned with Norco design kinematic, High pivot Horst Link and non-concentric idler. - 29" (with the option to change to 29'/27.5') with no compromise geometry and kinematics. - TranzX long-travel dropper with size spedific, adjustable drop. - SRAM GX Eagle AXS T-Type Transmission - Weight (S3): 16.1 kg / 35.6 lbs - Ride AlignedTM – Perfect fit, dialed handling and personalized setup in minutes. - No Other Way Limited Lifetime Warranty Optic’s durable frame design, hardware and component decisions have been made specifically to keep the Optic on the trail for longer. Accidents can happen, and when they do, Norco’s No Other Way Limited Lifetime Guarantee is our promise to get you back on the trail as soon as possible. Check out our new warranty on Norco.com

Whether you’re ripping fast flowy singletrack, putting the power down on punchy climbs, or tearing the tires off in the corners, the Optic continues to push the boundaries of what’s possible on a short travel trail bike. Designed around Norco’s VPSHP suspension layout that increases rearward axle path to improve suspension performance in technical terrain, while retaining the dynamic experience riders expect from a short travel trail bike. With 140mm/125mm of travel, the 2024 Optic condenses years of technology from long travel bikes into a lightweight package that’s as ready to tear up climbs as it is tackling challenging descents. The VPSHP suspension layout provides increased rearward axle path and an idler to manage pedal feedback, keeping Optic’s playful roots, while punching above its weight when the trails get rough. Through extensive testing using an i-track configured idler location, anti-squat has been tuned for efficiency and responsive feel under power. The idler mounted to the chainstay manages chain growth and pedal-kickback. Swapping the linkarm and lower shock mount with our “Missing Link Kit” converts between 29” and 27.5” to let you pick the wheelsize that suits you best, while maintaining geometry and kinematics to ensure consistent fit and bike setup.

Beyond the Expected. Revolver 120 sets the bar for what a Cross-Country bike can do. With 120 mm of front travel and 115 mm at the rear, it's fast, efficient, and capable. The Revolver is the lightest full-suspension frame Norco has ever built, with a surprising amount of capability. At the core of its efficiency is our advanced approach to a Flex-Pivot suspension design. With aggressive XC geometry and a carbon frame layup optimized for each frame size to enhance stiffness and compliance, Revolver maintains consistent kinematic and weight distribution across all sizes. It's a strong foundation for any rider to drive up and charge down, beyond the expected. Quick and snappy on acceleration, whether you're going up or ready to rip down, its suspension performance is well beyond what you can expect from a shorter travel bike. Head out for epic days, attack climbs, and crush descents, while cruising through the singletrack; it's the best choice for stage races or all-day adventures. SUSPENSION TRAVEL Precision and control for all-day efficiency. 120 mm of travel in the front and 115 mm of travel in the rear delivers lightweight, precise, efficiency whether you’re sprinting out of the saddle or holding your line on a rough descent. FLEX-PIVOT SUSPENSION At the core of its efficiency is Norco’s advanced approach to Flex-Pivot suspension design. This suspension layout gives us improved performance out of the lightweight, inline XC air shocks we're spec'ing that rivals the suspension sensitivity that would typically be reserved only for heavier and larger volume air shocks. Combined with consistent anti-squat and carefully tuned leverage curve progression, this platform gives Revolver an excellent balance of efficiency and technical capability. PERFORMANCE TUNED SUSPENSION Customized suspension development to support Revolver's best attributes. Done right, an XC bike doesn’t need a firm compression tune to feel efficient. For the Revolver 120, we worked with RockShox on a SIDLuxe tune with custom machined internals that improve shock sensitivity and enhance your ride through technical terrain. All this involving hours in the lab and endless laps on trail before we were satisfied, so that you can achieve optimal support, power transfer, and ride feel, wherever you ride. LIGHT AND DURABLE A lightweight frame that encourages putting the hammer down. 450g lighter than the previous generation, Revolver 120 is more than ready for the demands of the rowdiest cross country racing. The raw or tinted clear coat paint is half the weight of standard paint, while titanium hardware, compact double-row Enduro bearings, and compact links enhance durability and precision. GEO TO MEET MODERN XC DEMANDS Consistent weight distribution across all sizes. The Revolver 120 has a 66.5-degree headtube angle and seat tube angles that steepen per frame size. Stabilized rear centres also grow per size, for balanced weight distribution and a confident ride across sizing. The frame carbon layup was optimized per frame size for stiffness and compliance, giving you a strong foundation for driving up and charging down. Size 2–Size 5 frames accommodate two water bottles, and all sizes feature long dropper post compatibility for maximum descending capability. SIMPLIFIED MAINTENANCE Keeping your bike out of the shop and on the trails. Internal cable guide tubes offer easy cable routing and no headset cable routing complication. An industry standard threaded bottom bracket was used for easy maintenance and frames offer UDH compatibility for the new universal derailleur hanger. Revolver also comes with an ISCG05 chainguide mount, giving riders the option to fit a small chainguide onto the frame. RIDE ALIGNED™ Setup like a pro. Our industry-leading Ride Aligned™ Setup Guide is all about creating the best rider experience. Using a simple and incredibly precise process, it tunes your unique settings based on your body makeup and the way you ride. NO OTHER WAY LIMITED LIFETIME WARRANTY Revolver’s durable frame design, hardware and component decisions have been made specifically to keep you on the trail for longer. Accidents can happen, and when they do, our No Other Way Limited Lifetime Guarantee is our promise to get you back on the trail as soon as possible.

Beyond the Expected. Revolver 130 sets the bar for what a Cross-Country bike can do. With 130 mm of front travel and 120 mm at the rear, it's fast, efficient, and capable. The Revolver is the lightest full-suspension frame Norco has ever built, with a surprising amount of capability. At the core of its efficiency is our advanced approach to a Flex-Pivot suspension design. With aggressive XC geometry and a carbon frame layup optimized for each frame size to enhance stiffness and compliance, Revolver maintains consistent kinematic and weight distribution across all sizes. It's a strong foundation for any rider to drive up and charge down, beyond the expected. Quick and snappy on acceleration, whether you're going up or ready to rip down, its suspension performance is well beyond what you can expect from a shorter travel bike. Head out for epic days, attack climbs, and crush descents, while cruising through the singletrack; it's the best choice for stage races or all-day adventures. SUSPENSION TRAVEL Precision and control for all-day efficiency. 130 mm of travel in the front and 120 mm of travel in the rear delivers lightweight, precise, efficiency whether you’re sprinting out of the saddle or holding your line on a rough descent. FLEX-PIVOT SUSPENSION At the core of its efficiency is Norco’s advanced approach to Flex-Pivot suspension design. This suspension layout gives us improved performance out of the lightweight, inline XC air shocks we're spec'ing that rivals the suspension sensitivity that would typically be reserved only for heavier and larger volume air shocks. Combined with consistent anti-squat and carefully tuned leverage curve progression, this platform gives Revolver an excellent balance of efficiency and technical capability. PERFORMANCE TUNED SUSPENSION Customized suspension development to support Revolver's best attributes. Done right, an XC bike doesn’t need a firm compression tune to feel efficient. For the Revolver 130, we worked with RockShox on a SIDLuxe tune with custom machined internals that improve shock sensitivity and enhance your ride through technical terrain. All this involving hours in the lab and endless laps on trail before we were satisfied, so that you can achieve optimal support, power transfer, and ride feel, wherever you ride. LIGHT AND DURABLE A lightweight frame that encourages putting the hammer down. 450g lighter than the previous generation, Revolver 130 is more than ready for the demands of the rowdiest cross country racing. The raw or tinted clear coat paint is half the weight of standard paint, while titanium hardware, compact double-row Enduro bearings, and compact links enhance durability and precision. GEO TO MEET MODERN XC DEMANDS Consistent weight distribution across all sizes. The Revolver 130 has a 66.5-degree headtube angle and seat tube angles that steepen per frame size. Stabilized rear centres also grow per size, for balanced weight distribution and a confident ride across sizing. The frame carbon layup was optimized per frame size for stiffness and compliance, giving you a strong foundation for driving up and charging down. Size 2–Size 5 frames accommodate two water bottles, and all sizes feature long dropper post compatibility for maximum descending capability. SIMPLIFIED MAINTENANCE Keeping your bike out of the shop and on the trails. Internal cable guide tubes offer easy cable routing and no headset cable routing complication. An industry standard threaded bottom bracket was used for easy maintenance and frames offer UDH compatibility for the new universal derailleur hanger. Revolver also comes with an ISCG05 chainguide mount, giving riders the option to fit a small chainguide onto the frame. RIDE ALIGNED™ Setup like a pro. Our industry-leading Ride Aligned™ Setup Guide is all about creating the best rider experience. Using a simple and incredibly precise process, it tunes your unique settings based on your body makeup and the way you ride. NO OTHER WAY LIMITED LIFETIME WARRANTY Revolver’s durable frame design, hardware and component decisions have been made specifically to keep you on the trail for longer. Accidents can happen, and when they do, our No Other Way Limited Lifetime Guarantee is our promise to get you back on the trail as soon as possible.

Featuring our all-new VPSHP suspension technology and enhanced Ride Aligned Setup Guide to dial your suspension like a pro. Maximum versatility without compromise; Light, maneuverable and confidence-inspiring in the rough stuff. The name hasn’t changed but the technology has. The Norco Sight, evolved for 2024. With 160/150mm of travel, the 2024 Sight takes the best of the Range platform and has tightened it up into a light, pedal friendly, maneuverable, high-pivot package. Vigorously tested with an optimized idler position, Sight’s precise anti-squat characteristics, balance traction, and efficiency on technical climbs gives the new Sight more confidence in rough terrain but?in a pedal-friendly, light, and maneuverable package.

The Sight 160 is next level - big travel, big spec, and ready for big mountain riding. Whether you're out racing an enduro or love going fast on technical trails, this is your bike to blow through the chunder. Inspired by the gnarliest trails in the backwoods of BC, built for riders living in areas where the terrain demands more out of the bike they ride. An all-round beefier build to handle everything you throw down. We've stepped up on spec to help you handle more; a 35mm rise bar, big name brakes with metallic pads, Double Down rear tire casing, and coil rear shock with Sprindex spring to ride hard. All Sight models now include the One Up EDC lite tool to have you covered on the trail. VPSHP Suspension Platform Designed around Norco’s VPSHP (Virtual Pivot Suspension | High Pivot) suspension layout, it increases rearward axle path to improve suspension performance in technical terrain, while retaining the dynamic and responsive feel that riders expect from a do-it-all All-Mountain bike. With 160/150mm of travel, the 2024 Sight takes the best of the Range platform and has tightened it up into a light, pedal friendly, maneuverable, high-pivot package. Through extensive testing using an i-track configured idler location, anti-squat has been tuned for efficiency and responsive feel under power. The idler mounted to the chainstay manages chain growth and pedal-kickback. Swapping the linkarm and lower shock mount with our “Missing Link Kit” converts between 29" and 27.5" to let you pick the wheel size that suits you best, while maintaining geometry and kinematics to ensure consistent fit and bike setup. Details: - 170mm/160mm travel for BC-inspired trails. - Downhill oriented geometry, with efficient pedaling. - Burly, high-quality components that can handle it all. - Balanced weight distribution for top-of-class ride feel across sizes. - Available in carbon and aluminum. - VPSHP Suspension Platform. - Built to accommodate rider preference in wheel size. - Ride Aligned™ - Perfect fit, dialed handling, and personalized setup in minutes. - No Other Way Limited Lifetime Warranty.

Looking for that totally dependable singletrack sidekick with solid kung fu skills? Look no further. The Process 134 is ready for any kind of riding you want to explore, from the sublime to the sketchy. Refined progressive geometry never sets a wheel wrong, and new suspension kinematics that are perfect out of the box not only keep the wheels railing smooth but can smoothly incorporate any amount of upgrade you want to throw in down the line. Smart spec ensures ripping good times and peace of mind. The Process 134 offers all the legendary durability, flip-chip versatility and jib-friendly behavior of its bigger siblings at an unbeatable price.

You want a nice bike, but you’ve been hesitating to pull the trigger. What’s the right amount of travel? How can you be sure you’re getting great value? How do you know this bike is the only bike you’ll need? Because you gotta trust the Process, that’s why. The Process 134 DL 27.5 is thoughtfully put together to ensure every box is checked. It features a spec that puts the money where it matters: suspension, brakes, and drivetrain. It also comes in sizes XS-XL ensuring that no matter how tall or short you stand you’ll find a perfect fitting ride. It’s perfection in a bike.

We’re not going to say that the Process 134 CR DL will suddenly make you able to rip turns or jib with anywhere near the style of Caleb Holonko or Eddie Reynolds, but at least you won’t be able to blame the bike if you come up short. And, supposing you DO come up short, the 134 CR DL’s beautifully made carbon fiber frame is built to take it. Flip-chip convenience lets you choose between the stability of full 29” wheels or the flickability or a mullet setup. Ultra-plush RockShox suspension makes molehills out of mountains, SRAM AXS T-Type drivetrain delivers shifting precision and smooth rolling DT Swiss hubs keep the party railing on down the trail. This is the mid-travel quiver killer.

Your weekends never saw this coming. The base 153 is like a best friend and trusty pickup truck rolled into one – a rugged aluminum shred machine built to slay every adventure you put in front of it and still leave room in your life for things like food and rent. It runs the same telepathically awesome geometry as all the other Process 153 models, but utilizes carefully thought out components that get the job done without any bragging and without breaking the bank. Fully featured like its big siblings with flip-chip mullet compatibility, the 153 is your ticket to ride. Entry level? More like gateway drug…

The perfect Goldilocks bike between the Process 134 and Process X, the Process 153 hits all the sweet spots. This is the bike for the rider looking to go a bit bigger but needs something on the more budget-friendly end of the scale. The 160/153mm front and rear suspension gives you unwavering reliability on tricky descents while still being an efficient climber. It’s spec’d with everything you need and nothing you don’t. Strong brakes, dependable suspension and grippy tires equal the perfect all-around package without crazy sticker shock.

The Ripley AF is for all kinds of riders on all kinds of trails. Whether you're new to the sport, linking up big backcountry rides with friends, or just out to see where that next singletrack leads, the Ripley AF brings the same fast, playful feel the Ripley is known for—in a tough aluminum package that’s ready for anything. With 130mm of rear travel and 140mm up front, it climbs efficiently and descends with confidence. Its progressive geometry gives it quick and responsive handling on tight trails while keeping things stable when the speed picks up. Designed for riders who value agility, capability, and all-around fun, the Ripley AF shares all the features of its carbon counterpart: DW-Link suspension, 29” wheels front and rear, flip chips to run a 27.5" rear wheel (if you’re into mullets), and in-frame storage with two included bags — for all your snacks and tools.

The Ripmo AF legend continues, bringing big-mountain capability to a rugged, aluminum package — blending long-travel confidence with trail-friendly efficiency. With 160mm front and 150mm rear travel, DW-Link suspension, and Flip chips for using a 27.5” or 29” rear wheel, it’s built for steep descents, chunky terrain, and climbs better than it should. Progressive geometry and a durable frame make it ideal for riders who push hard and want a bike that can keep up, lap after lap. Whether you're racing enduro, exploring alpine singletrack, or sending the local lines, the Ripmo AF delivers the same legendary performance as its carbon sibling. The Ripmo AF has all of the same features as the carbon bike, in-frame storage with two bags, coil compatibility, progressive geometry, all at a more approachable price. Sizes Small – Medium: 29-inch front / 27.5-inch rear Sizes X-Medium – X-Large: 29-inch

The Ripmo AF (Aluminum Frame) brings the award-winning performance of the carbon Ripmo to a wider, rowdier audience. It’s everything we love from the carbon Ripmo, plus a few tweaks. It’s Metal Over our long tenure from mountain biking’s awkward adolescence to its current anything-shreddy era, we’ve experimented with steel, aluminum and titanium—remember the Bow-Ti, the first superbike? We remember the metal times too, and it feels good to offer a premium ride experience to our broadening family of riders, courtesy of durable, affordable aluminum alloy. Universal Derailleur Hanger The Rip­mo AF UDH fea­tures a UDH derailleur for max­i­mum future com­pat­i­bil­i­ty and moves to a 55mm chain line. The wider chain line allows for a stiffer chainstay. Modern Geometry With a steep, 76-degree seat tube angle and a rangy but not stratospheric reach, the Ripmo AF places riders centrally and upright over the bottom bracket. It makes for an efficient position that can go the long haul without placing too much weight on its slack, 64.9-degree headtube angle. A 44mm reduced-offset fork is more surefooted on steep descents and steadies high speeds. Better up, better down. DW Link Since 2005, we’ve part­nered with sus­pen­sion guru Dave Wea­gle on the dw-link sus­pen­sion plat­form. It pro­vides an unpar­al­leled com­bi­na­tion of climb­ing effi­cien­cy and down­hill per­for­mance, which has been proven repeat­ed­ly at the high­est lev­els of racing. Air & Coil Compatible The Ripmo AF is compatible with both coil and air shocks due to a more progressive leverage rate. It allows for coil’s linearity to thrive and we spec air shocks with tunes that provide pop without feeling too harsh. On the trail, it gives the suspension a supple feel throughout the entirety of the stroke, enhancing traction no matter how deep you dig. 2.6" Tire Clearance Ibis helped pio­neer the wide rim rev­o­lu­tion, which inspired the new crop of wider 2.4"-2.6" tires. When paired togeth­er, this com­bo can be run at ultra low pres­sures which results in elbow-drag­ging cor­ner­ing trac­tion with­out sac­ri­fic­ing straight line speed. Pick Your Size We use words like small, medi­um, and large to describe our siz­ing because it’s easy to under­stand, but our ultra low stan­dovers give you the abil­i­ty to size your frame based on reach and preference. Long Dropper Post What’s better than a dropper post? A longer one. Our frames are designed to accommodate the longest dropper posts possible. Riders over 5’8 (or 173cm) can easily run a 185mm dropper post, while folks between 5’ and 5’8 (152cm - 172cm) can use a post 125mm or longer depending on inseam length. Removable ISCG05 Mount Our optional ISCG 05 mount is there if you want it, removable if you don’t. Lifetime Warranty If it’s our fault, we’ll fix it. Simple as that.

The Ripmo isn't just a bike; it's a legend. With multiple "Best in Test" awards and years of high level competition at the notoriously brutal Enduro World Series, it’s the ultimate trail-slaying machine. How do you improve on that? The Ripmo is loaded with new features: internal downtube storage, a flip chip for mixed wheels, a slacker head angle, and increased coil compatibility. We've also expanded our sizing options and added size-specific details—right down to the bottom bracket height. Wheel size: Sizes Small – Medium: 29-inch front / 27.5-inch rear Sizes Medium/Large – X-Large: 29-inch *Specs may vary from image displayed*

Light, lively Split-Pivot Django brings unstoppable stoke to a tangle of trail types. This capable short-travel machine shines on climbs while bringing adept handling to gnarled, technical turf. Superboost 157 rear spacing combined with 29x2.6 tire clearance accentuates its punchy, aggressive powers on rolling terrain. Relocated adjustable geo flip chips mean less moving parts and simple on-the-fly adjustability. And threaded BBs make for easy maintenance, while molded chainstay and downtube protection helps buck rocks and loose debris. Jump on the fun-hogging Django 29 today and find your happy place — everywhere you ride.

The Marshall is a Made in Canada, made for the people, light-up the trails dual-suspension mountain bike. At its heart, the all-new 130mm travel aluminum frame delivers Split-Pivot performance and reliability with key features like Boost spacing, size-appropriate wheel sizes, a dropper post, polyurethane frame protection and a lifetime warranty-all in a more wallet-friendly package. Paired with a 140mm fork and reliable parts, the Marshall delivers no-fuss riding for no-nonsense riders. Wheel size: -Sizes X-Small – Small: 27.5-inch -Sizes Medium – X-Large: 29-inch

ALL MOUNTAIN One bike, zero excuses. The Troy is a quiver killer. In its fourth-generation, the 140mm travel frame gets a svelter rear-end with improved clearance and ample room for up to 2.6" tires. It also has stouter, double-row linkage bearings and refined geometry with size-specific chainstay lengths and longer reaches on all sizes-results of serious testing around the globe. If you're looking for a trusty rig to take on everything your skills can handle, and maybe some stuff they can't yet, the Troy is your bike.

Lightning with a bottle cage. The new Troy ST is the black belt in the Troy family. Insanely agile, the 130mm travel Split Pivot frame has updated geometry with size-specific chainstays that will have you riding stuff you thought you wouldn’t, fast. Its integrated downtube storage and go get ‘em attitude will lure you into all day rides on “once a year” trails, weekly. Full 29 in M-XL sizes and full 27.5 in XS-S, the ST isn’t trying to be anything it’s not. It’s made in Canada, guaranteed for life and ready to rumble. This bike is proof that with travel, sometimes less is more. FRAME TECH SPECS Rear travel 130 mm Front travel 140 mm Rear tire clearance 27,5'' x 2.6” / 29'' x 2.5'' Rear hub spacing 12 x 148 Boost Max & min chainring clearance Max. 34T | Min. 28T Chainline 55 mm Derailleur hanger UDH™ Caliper mount 200 mm Post Mount Seat tube diameter 31.6 mm ID / 34.9 mm OD Headset Top ZS44 | Bottom ZS56 Cable routing Internal Rear shock dimension Trunnion | 185 x 47.5 mm Rear shock hardware Top: NA | Bottom: 40 x 10 mm Linkage bearing type Enduro™ double-lip sealed Chain guide mount ISCG 05 – 3-Bolt Frame material Aluminum 6061-T6 | Optimum G04

One bike, zero excuses. The Troy is a quiver killer. In its fourth-generation, the 140mm travel frame gets a svelter rear-end with improved clearance and ample room for up to 2.6" tires. It also has stouter, double-row linkage bearings and refined geometry with size-specific chainstay lengths and longer reaches on all sizes-results of serious testing around the globe. If you're looking for a trusty rig to take on everything your skills can handle, and maybe some stuff they can't yet, the Troy is your bike.

Flow Seeker A trail mountain bike that is primed for grinding climbs, mashing flats, and ripping descents. One for all, and all for fun! Where it thrives Out in the elements What it's built for Trail riding fun Highlights - SmartForm C1 Alloy Frame / SRAM NX Eagle 12-speed drivetrain - Rockshox Pike Select 140mm fork / Deluxe Select+ shock - SRAM G2 R 4-piston hydro discs / TranzX dropper post Suspension Built for You A rider's center of gravity drives how the suspension performs, yet most bikes use the exact same layout for all sizes. Proportional Response Suspension alters the design by size for truly net-level prefornace. Proportional Response Full size-specific frame geometry, right down to the chainstay lengths. Keep the rider centered between the wheels for incredible traction and handling. Downtube Protection Have peace of mind, knowing a rugged rubber guard is protecting your piece.

"Flow Seeker A trail mountain bike that is primed for grinding climbs, mashing flats, and ripping descents. One for all, and all for fun! Highlights - Full Carbon frame / Shimano XT/SLX 12-speed drivetrain - Rockshox Pike Select 140mm fork / Deluxe Select+ shock - Shimano Deore 4-piston hydraulic discs / DownLow dropper post Built for you The Habit geometry is uniquely size specific. With our Proportional Response Design, everything from the suspension layout to, the geometry —even the length of the chain stays — is completely customized by size. Performance built, just for you. Blissfully Balanced With a head tube angle of 65.5° and the seat tube set at 77.5°, you are sitting in the optimal position for powering uphill, shredding downhill, and stopping to smell the roses. Easy to love Keeping things simple and easy for the rider with threaded BBs, universal derailleur hanger, standard shock mount, internal cable routing, and an updated 55mm chain line standard for tire clearance. All designed to make it as easy as possible to live with and to love. "

EVERY RIDER, EVERY TRAIL The Norco Fluid can dive into corners. And carve sweeping turns. It's as happy mixing it up in the backwoods, as it is rolling local trails. It can elevate beginner riders to intermediate. And carry intermediates to expert. It can take your weekend hobby and turn it into a lifestyle. While so many bikes are made for a specific something or somebody, what the world needs is a bike built for every rider and every trail. That's the Norco Fluid. RIDER BENEFITS THREAD THE NEEDLE - Intuitive precision handling to pick the perfect line. - Engineered using the same Norco technology and process as our top-tier Trail bikes to give you the ride of your life no matter what path you follow. POTENTIAL FULFILLED - Top-tier design and features over-deliver as skills evolve. - 6061 aluminum frame gives experienced Trail riders what they need to ride their best and helps evolving riders develop new skills and preferences without limits. CUSTOM TUNED SUSPENSION - Sophisticated suspension components for full-platform performance and tunability. - Precision-engineered 130mm rear suspension features custom-tuned dampers co-developed with the shock manufacturers provides fully customized suspension setup and performance for every rider. ROOM TO MOVE - Long-travel droppers and generous standover get you through the rough stuff. - Long-travel, size-specific 34.9mm dropper posts and low-slung top tubes create lots of room to move, letting you roll confidently through challenging terrain and push your limits. PERFORMANCE FOR ALL - Refined design and expanded size range for accessible Trail performance. - Boutique-level fit & finish is available in 5 frame sizes, delivering superior Trail performance to riders between 5'1" and 6'7" with components selected to offer peak performance and durability. RIDE ALIGNED - Perfect fit, dialed handling and personalized setup in minutes. - The Ride Aligned Design System matches each Fluid FS to the human who rides it. - Rider-first geometry and suspension kinematics combine with custom fit and suspension tuning for personalized performance from day one.

EVERY RIDER, EVERY TRAIL The Norco Fluid can dive into corners. And carve sweeping turns. It's as happy mixing it up in the backwoods, as it is rolling local trails. It can elevate beginner riders to intermediate. And carry intermediates to expert. It can take your weekend hobby and turn it into a lifestyle. While so many bikes are made for a specific something or somebody, what the world needs is a bike built for every rider and every trail. That's the Norco Fluid. RIDER BENEFITS THREAD THE NEEDLE - Intuitive precision handling to pick the perfect line. - Engineered using the same Norco technology and process as our top-tier Trail bikes to give you the ride of your life no matter what path you follow. POTENTIAL FULFILLED - Top-tier design and features over-deliver as skills evolve. - 6061 aluminum frame gives experienced Trail riders what they need to ride their best and helps evolving riders develop new skills and preferences without limits. CUSTOM TUNED SUSPENSION - Sophisticated suspension components for full-platform performance and tunability. - Precision-engineered 130mm rear suspension features custom-tuned dampers co-developed with the shock manufacturers provides fully customized suspension setup and performance for every rider. ROOM TO MOVE - Long-travel droppers and generous standover get you through the rough stuff. - Long-travel, size-specific 34.9mm dropper posts and low-slung top tubes create lots of room to move, letting you roll confidently through challenging terrain and push your limits. PERFORMANCE FOR ALL - Refined design and expanded size range for accessible Trail performance. - Boutique-level fit & finish is available in 5 frame sizes, delivering superior Trail performance to riders between 5'1" and 6'7" with components selected to offer peak performance and durability. RIDE ALIGNED - Perfect fit, dialed handling and personalized setup in minutes. - The Ride Aligned Design System matches each Fluid FS to the human who rides it. - Rider-first geometry and suspension kinematics combine with custom fit and suspension tuning for personalized performance from day one.