Parts & Accessories

This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training. - Suitable for handlebars with a diameter ranging from 26mm to 35mm - Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm

- Di2 internal battery, fits all e-Tube Di2 groups - Capacity: 500 mAH (± 2000km) - Use with EW-WU101 or SC-MT800 interfaces/junction to gain BlueTooth Smart wireless connectivity for on-the-fly adjustments with smartphones and tablets - Requires SM-BCR2 charger

SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete. - Finish: Black - Compatibility: SRAM RED eTap

- Discreet way to install an Apple AirTag inside your tubeless tire - Identify the location of a stolen bike, enabling the owner to alert local authorities for retrieval - AirTag is housed in a 3-part silicone and rubber tubeless valve mount - Sacrificial stem, ensures tracker and rim protection under impact - Silicone top cover protects tracker and internal plug reduces sealant ingress - Supplied with 3 pairs of our rubber valve bases to suit different rim profiles for the optimum seal - Note the Tubeless Secure Tag Holder can only be used in rear wheels – not for use on the front wheel Compatible tire types: - MTB tyres (XC, Enduro Trail, Downhill) - Gravel Tires (the narrowest recommended tyre size is 38mm wide)

Complete two tasks with one cable using our charging/data clip. Connect the cable to your computer's USB port to recharge your compatible device and to transfer data to and from your computer. This cable also pairs with an optional AC adapter (sold separately). Compatible Devices: - Approach G10 Approach G10 - Approach S20 Approach S20 - Forerunner 230 Forerunner 230 - Forerunner 235 Forerunner 235 - Forerunner 35 Forerunner 35 - Forerunner 630 Forerunner 630 - Forerunner 645 Forerunner 645 - Forerunner 645 Music Forerunner 645 Music - Forerunner 735XT Forerunner 735XT - vívomove HR vívomove HR

Stay aware of approaching cars with Varia RTL515 rearview radar. It pairs with your Edge bike computer or compatible smartphone to alert you of vehicles approaching from behind up to 153 yards (140 meters) away. When used with your compatible smartphone, the Varia app uses bold graphics — plus tone and vibration alerts — to indicate the position and speed of approaching vehicles. MAXIMUM AWARENESS - Varia RTL515 rearview radar provides visual and audible alerts for vehicles approaching from behind up to 153 yards (140 meters) away. MULTIPLE PAIRING OPTIONS - This radar works seamlessly with your Edge bike computer or compatible smartphone as well as select Garmin wearables or the optional radar display unit. WORKS WITH THE VARIA APP - This smartphone app helps you increase your awareness by providing graphics — plus tone and vibration alerts — that indicate the position and speed of approaching cars. THIRD-PARTY APP COMPATIBLE - When used with a compatible smartphone, Varia radar integrates with your favorite apps, such as Ride with GPS to overlay your maps with rearview radar alerts. SUPERIOR VISIBILITY - Alert motorists to your presence as soon as possible with daylight visibility up to 1 mile. COMPACT DESIGN - Easily mount this sleek, compact device on the seatpost of almost any road-use bicycle. The vertical design allows for better leg clearance and a perfectly comfortable ride. PELOTON MODE - Varia RTL515 features multiple modes, including peloton mode, which provides a low-intensity flash that is kind to other cyclists’ eyes when riding in a group. BATTERY LIFE - Time spent charging is not as good as time spent riding. Get up to 16 hours of battery life in day flash mode and up to 6 hours in solid mode. Physical Specifications - Dimensions: 3.9” x 0.8” x 1.6" (98.6 x 19.7 x 39.6 mm) - Weight: 2.5 oz (71.0 g) - Modes: solid, peloton, night flash, day flash - Lumens: 20 solid, 8 peloton, 29 night flash, 65 day flash - Battery life: 6 hours solid, 8 hours peloton, 6 hours night flash, 16 hours day flash - ANT+: Yes - BLE: Yes - Water rating: IPX7 - Viewing angle: 220° In the box: - Varia RTL515 - Mounting Kit - Cables - Documentation

- Spare battery for computers and sensors - Unit, on card

Wheel magnet for all CatEye cycle computers

Seamlessly connected. This SP Connect kit allows any smartphone case to be connected to the Intellimount Stem for a tidy dashboard on your bike. Highlights: - Fits most smartphone cases - Includes Intellimount adapter, adhesive mount and stand tool - Compatible with all SP products

Zipp delivers an uncomplicated computer mount for aerobar extensions that’s easy to install, lightweight, and vibration and slip free. The 22.3mm industry standard mount installs simply and securely on aero extensions. The Zipp QuickView TT Computer Mount is aerodynamically shaped for left-side installation, but also can be installed on the right bar extension. It comes with a single Torx T25 bolt, flexible mounting clamp, and a quarter-twist mount.

Handlebar computer mount for Garmin/Wahoo for Vuka Shift AXS

- Easy to mount smartphone case holder - High resistance against impacts - 360 degrees adjustable angle - Quarter-turn type mount allows to place the phone in portrait or landscape mode - Waterproof, touch-screen compatible cover included

- Adjustable handlebar mount for any Z Console - Puts the phone front & center of the stem in either landscape or portrait mode - Integrated GoPro camera mount - Sturdy aluminum construction - For 31.8mm handlebars (includes shims for smaller diameters)

Band style clamp with integrated QuickClick mount for fast, easy attachment and removal of Topeak Ratchet Rocket tool case and SmartPhone DryBag. - Fits 22mm-44mm tubes

With the Tacx tablet stand you can place your tablet at a comfortable height and distance while using your bike trainer. Adjustable to different tablet sizes - length 182-267mm, width 112-197mm, max. thickness 13mm.

Use this ANT+ antenna to connect an ANT+ trainer to your computer. That enables you to use computer software during your training sessions, such as the Tacx Trainer software, Zwift, and TrainerRoad. These programs read the training data transmitted by an ANT+ trainer and can control the trainer. It features a long cable so the receiver can be placed close to the trainer for an optimal reception without loss. The antenna is compatible with all trainers that communicate wirelessly via ANT+.

Stages magnet-free Speed sensors fit to your hub to provide real-time, accelerometer-based speed data to your cyclometer or phone via ANT+ and Bluetooth Smart. - Compatible with most wheels - Installs/removes in seconds - IPX7 Water Resistant - Super light—just 8 grams - Runtime: 600 hours - Operating range: 2-60 mph - Blue and red LEDs indicate pairing, activation, and low battery status

The Stages Spindles "G" bottom bracket spindle allows the retrofit of the carbon Stages Power meter for SRAM BB30 DUB MTB cranksets. The spindle is manufactured for Stages Cycling by Full Speed Ahead, forged and machined out of aluminum to allow for the carbon Stages Power meter for FSA 386 EVO and Stages Carbon 30mm model to be used with SRAM DUB MTB. The Stages Power meter 30mm spindle is specifically designed to meet or exceed the performance of the manufacturer's stock component, while allowing the retrofit of the new carbon Stages Power Meter to a rider's SRAM drivetrain. - Spindle only

The new DN300 Built-In type battery features the same waterproof design that Di2 users have loved for generations. Now with 3 ports, it delivers stable power to Shimano's 12-speed road derailleurs (and shifters if a fully wired option is selected). - Compatible with thinner next-generation electric wire SD300 and systems after R9250/R8150 series - Li-Ion type - Capacity: 500 mAH |3.7Wh (± 2000km autonomy) - Rated voltage: 7.4V - Charges through RD-R9250 |RD-R8150 rear derailleur using EW-EC300 Di2 Charging Cable (sold separately) - Fixing small parts included - Weight: 52g

Replacement/Spare Part – UNI-GO2 GoPro Adapter Bracket Allows mounting of Serfas headlights to GoPro action camera mount systems (e.g. helmet mount, handlebar mount, etc.) - Compatible with all current E-Lume and late model True Series headlights

The QuickView was designed to put the Garmin Edge Computer out in front of the stem. Fits Garmin 605 and 705. - Glass-filled nylon, stainless steel Torx T25 bolt - Weight: 20g

- Shift buttons mounted to the end of a bar plug - Included wire connects to Blip Box - Fits bars with 19 - 20.5mm inside diameter

Be it the fireworks of a finale, an ideal rhythm, climbing on the top, or a deep, dark place extracting the last kilojoule of effort on your bike split, you want to adjust your gear with the twitch of a finger. eTap Blip satellite shifters allow you to shift when you want, where you want. - Limitless remote shifting positions for drop and aero bars - Wired shift buttons can be positioned however the rider prefers - Connect to Blip Box or drop bar eTap levers - Compatible with SRAM RED eTap shift/brake controls

SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap

- Use to keep Blips in place on handlebars - Fits 31.8mm round portion of drop bar - Clamp mounts directly to bar outside of tape zone - Ideal for use with thumbs or index fingers while hands are on the tops - Right and left specific, just like Blips - Weight: 12 grams (for pair) - Material: Polypropylene - Compatibility: 11-speed - Recommended Group: SRAM RED eTap

External Blip mount for aero extensions and base bars - 360 degree rotation for adjustment - Aero use only to fit 22.2mm OD bar 65mm in length - Fits all Zipp aero extensions and base bars - Blips not included - Weight: 57 grams for pair (does not include Blip) - Material: Polypropylene + TPE - Compatibility: 11-speed - Recommended Group: SRAM RED eTap

MORE POWER, WITH SECURITY, MORE COMFORT. Water-repellent mobile phone case for the bicycle handlebar Everything in view - in any weather: The smartphone case COM/SMARTBAG can be attached to any COMPIT cell phone holder thanks to the adapter. A special COMPIT cover is therefore not necessary. The large transparent window ensures that the touchscreen is easy to operate, and it is also possible to unlock the cell phone with a fingerprint directly through the film. The lower extra compartment not only offers additional storage space for keys and money, but also space for the COM/UNIT power bank for inductive charging of the mobile phone while driving. For attachment to the COMPIT mobile phone holder system When touring in rough terrain, it is advisable to charge the cell phone with a cable. Optionally, the COM/UNIT can also be attached directly under the SMARTBAG to the COMPIT smartphone holder. In this case, the mobile phone must always be charged via cable through the cable guide. Suitable for smartphones with a maximum size of 155 x 80 x 15 mm. - Only compatible with the COMPIT system - Extra storage space - Water-repellent - Can be operated through foil - For all common smartphones - Weight: 115g

COMPIT Phone Covers (or the COMPIT Phone Adapter) are needed to securely mount the phone to the COMPIT unit. The cover has a special mounting device that allows the phone to be docked into the COMPIT system. Enclosing the outer edges of the phone and extra-durable at the points of maximum stress, this cover is made of shock-absorbing, high-quality, wear-resistant plastic. It can be easily attached and removed from the phone. - For iPhone 11 Pro

COMPIT Phone Covers (or the COMPIT Phone Adapter) are needed to securely mount the phone to the COMPIT unit. The cover has a special mounting device that allows the phone to be docked into the COMPIT system. Enclosing the outer edges of the phone and extra-durable at the points of maximum stress, this cover is made of shock-absorbing, high-quality, wear-resistant plastic. It can be easily attached and removed from the phone. - For iPhone 6+/7+/8+

COMPIT Phone Covers (or the COMPIT Phone Adapter) are needed to securely mount the phone to the COMPIT unit. The cover has a special mounting device that allows the phone to be docked into the COMPIT system. Enclosing the outer edges of the phone and extra-durable at the points of maximum stress, this cover is made of shock-absorbing, high-quality, wear-resistant plastic. It can be easily attached and removed from the phone. - For iPhone 6/7/8